• Channel information not received from WING over StageConnect

• Fader and potentiometer read round avoiding crosstalk between VRs

1.0.5

• Update Offline Products

• UI bugfixes

1.0.4

• UI bugfixes

1.0.3

• Added P24 Personal Monitoring System support

1.0.2

• UI bugfix

• Nomenclature update

1.0.1

• Changes to SC calculations and limitations

• USB audio issues (mostly at 44K1)

P24 personal monitoring system.

With each firmware update, a specific firmware file for each WING model is provided

(WING, WING COMPACT or WING RACK).

IMPORTANT NOTE: If you are using the WING-DANTE expansion card or the internal AoIP-Dante module,

you must also update the module’s firmware. Firmware files and update instructions are available on

the product page and in the general downloads section.

New Features

• Source name transmission over StageConnect

• Hold down the HA REMOTE / RCV CUST button to apply settings to all sources in the selected group

• Hold down STOP option button to apply settings to the whole clip playlist

• AES50 error counter on the SETUP > AUDIO screen to help identify faulty cables and connections. (COR = corrected; UNC = uncorrected)

• WING COMPACT only: hold down any CC button and turn the rotary encoder below the main meter to adjust FX parameters.

• Reset EQ band by holding down the band selection button

• SD recorder error messages shown in text form

• CC button options to change CC bank

Changed

• Solo (POST) follows panning on INPUT and AUX channel, and DCAs

• WING-LIVE displays a warning message if recording dropouts occur due to a slow SD card

Fixed

• Toolbox “IN” copy option not available for all channel type combinations

• CC assigned to SD recorder session list or marker list not working correctly on long sessions

• CC display not updated when switching CC banks while a CC is held down

• Sporadic audio clicks when using Dante

• Short streams of digital zeros in transmitted audio when using Dante (when WING is Dante

• clock leader) (BRK2 modules only)

• Function could not be deactivated when using GPIO to set fixed fader levels.

• TAP WIDTH not stored in SNIPPETS

New Features

• Customizable channel strip (switchable UI elements)

• Customizable fader sensitivity

• Switchable channel metering

• Horizontal padding (to avoid the camera cutout on some Android devices)

• Lock BUS selection

• Optional USER layer

• MCA spill

Changed

• Scrollable MIX page

• Simplified MCA page

• Panning control available on send configuration window

Fixed

• MCA assignment bug depending on the send mode

New Features

• Customizable channel strip (switchable UI elements)

• Customizable fader sensitivity

• Switchable channel metering

• Horizontal padding (to avoid the camera cutout on some Android devices)

• Lock BUS selection

• Optional USER layer

• MCA spill

Changed

• Scrollable MIX page

• Simplified MCA page

• Panning control available on send configuration window

Fixed

• MCA assignment bug depending on the send mode

• Gated Reverb

• Reverse Reverb

• Delay + Chamber

• Chorus + Chamber

• Flanger + Chamber

• Sound Maxer

• Stereo/Dual Exciter

• Stereo/Dual Enhancer

• Edison EX1

• Dimensional Chorus

• Rotary Speaker

• Suboctaver

• Stereo Imager

• Mood Filter

• Copy/Past functionality in the effects rack

Improvements

• Optimized effects loading time

• Optimized the DISCONNECT function

• Decreased the Ultimo Compressor’s OUTPUT knob touch sensitivity for more precise adjustments

• Improved meter loading

Bug fixes

• Fixed SENDS functionality on the MAIN page

• Resolved minor issues on FX slots 5-8 for X32 models

• Fixed tooltip issues in the CHANNEL CONFIG page

• Fixed SENDS screen numbering mismatch

• New BUS FEED CONFIGURATION screen. Click on channels/AUX channels/BUS/MAIN/MATRIX grid on the channel HOME screen to quickly change SEND settings for all channels.

• Adjustable LC and HC filter slopes on input channels

• Panning control on SEND configuration pop-up window

• INIT and COPY functions accessible from the FILTER page

• COPY function between different channel types

• SEND faders can display either SOURCE or destination levels and customization

• Channel SEND faders visible in FADERS screen

• Warning when creating a SNIPPET without an active REC FOCUS

• Warning message when an M/S SOURCE is assigned to an AUX channel

• Exclusive solo on CHANNEL OVERVIEW page

Changed

• WING RACK spills on the small LCD display when SPILL mode is active

• Default BUS modes removed. All sends are individually configurable.

• Removed the capability to send a BUS to the same BUS.

• Source channel highlighted with a white outline on COPY screen.

• Spill layer named according to the spill mode

• WING COMPACT main fader section LED meter shows the selected channel’s pre-fader level.

Fixed

• Unavailable filter bands (when using high-order LC or HC options on BUSES) were shown sometimes.

• MATRIX SEND panning visibility

• SEND panning not updating when BUS switched to mono

• Main fader assignment when set to MATRICES on WING COMPACT

• USB ACCESS LED on WING RACK

• Errors when loading a file after renaming

• Some controls were no longer selectable when closing windows

• ULTRATAP DELAY “SPREAD” mode panning positions

• Layer paging arrows not always updated

• Hidden faders could appear on OVERVIEW screen under special conditions

• SENDS panning link not correctly activated when loading snapshots created on firmware older than 3.0

• SEND WIDTH set to 150% when restoring snapshots created on firmware older than 3.0

• Clicking on COMPACT layer 9 SCOPE closed the window

• SEND panning wheel visibility not always updated correctly

• Level meters on SENDS page showed the BUS level instead of each channel’s level (SEND source)

• Panning control on SEND configuration pop-up window

Changed

• Functionality aligned with new FW 3.0.5:

  • Removed the capability to send a BUS to the same BUS.

• Panning control on SEND configuration pop-up window

• Adjustable LC and HC filter slopes on input channels

Changed

• Functionality aligned with new FW 3.0.5:

  • Default BUS modes removed. All sends are individually configurable.

  • Removed the capability to send a BUS to the same BUS.

• SHOW CONTROL GO+PREV and GO+NEXT functions changed to GO PREV and GO NEXT (scene is recalled after moving the selection)

• EQ UI improvements

• 3-Tap Delay

• Rhythm Delay

• Modulation Delay

• Stereo/Dual DeEsser

• Stereo/Dual Leisure Compressor

• Stereo/Dual Ultimo Compressor

• Wave Designer

• Stereo/Dual Pitch Shifter

Changed

• New phantom power icon for improved visibility

• Send options displayed around the pan pot

Changed

• ULTRATAP DELAY slope from +/-6 dB to +/-24 dB

• Pan pot editable in a pop-up window

• UI refinements to keep consistency with WING firmware and WING Edit

Fixed

• Various issues regarding bus to bus mixing

New Features

• Stereo/Dual Guitar Amp

• Vintage Room

• Vintage Reverb

• Plate Reverb

• Stereo/Dual Tube Stage

• Tremolo/Panner

• Stereo Phaser

• Stereo Flanger

V1.8

New Features

• Stereo/Dual/M/S Fair Compressor

• Stereo/Dual TruEQ

• Stereo/Dual Xtec EQ1

• Stereo/Dual Xtec EQ5

• Delay + Chorus

• Delay + Flanger

V1.7

New Features

• Stereo/Dual Graphic EQ

• Stereo Delay

• Stereo Chorus

• Stereo/Dual Combinator

Improvements

• Improved loading times

• Optimized user interface for a better experience on smaller tablets

V1.6

New Features

• Hall Reverb

• Ambience

• Room Reverb

• Rich Plate Reverb

• Precision Limiter

V1.5

New Features

• Channel configuration section for MUTE GROUPS, DCAs and other parameters

• Channel GATE added

• EQ graphics added

• DYNAMICS screen added

• METERS screen adapts to connected console

• RTA Settings in METERS screen added

• Channel SENDS added

V1.3.6

New Features

• RTA in METERS screen

• RTA Settings

Improvements

• METERS screen changes

Version 1.3

New Features

• Channel Configuration screen added

• GATE screen added

• DYNAMICS screen added

Version 1.2

New Features

• Presets for X32 series consoles

• DYNAMICS support

• EQ with interactive graph supported

Improvements

• Performance enhancements

Fixed

• Minor bugfixes

• Send options displayed around the pan pot

Changed

• Pan pot editable in a pop-up window

Fixed

• Various issues regarding bus to bus mixing

• Option to change network mode when using AoIP-WSG module

Fixed

• Drag issues on EQ screen

• Channel strip LEDs (MAIN, DCA, MUTE GROUP) not working correctly on full-size WING

Note: WING Q is compatible with WING Firmware 3.0 or higher.

New Features

• Functionality aligned with new FW 3.0:

  • Full bus to bus mixing

  • Firmware version check

Changed

• Android SDK version increased to 34 (due to Google Play Store requirements)

• iOS Deployment Target (minimum required iOS version) increased to 14 (due to several iOS issues on 12/13)

• Warning when a bus is sent to the same bus (feedback loop)

Note: WING COPILOT is compatible with WING Firmware 3.0 or higher.

New Features

• Functionality aligned with new FW 3.0:

  • Full bus to bus mixing

  • Delay for AUX channels, BUSES, MAINS and MATRICES

  • MTX direct input

  • Talkback

  • Firmware version check

  • New options for the quick access toolbar

  • Model selection for offline mode

  • Source solo support

Changed

• Android SDK version increased to 34 (due to Google Play Store requirements)

• iOS Deployment Target (minimum required iOS version) increased to 14 (due to several iOS issues on 12/13)

• All pages that deal with bus to bus mixing, input delay and MTX direct input

• Talkback setup page

• Warning when a bus is sent to the same bus (feedback loop)

Fixed

• UI issues in metering sources/outputs

New Features

• Support for new devices (SETUP > WING MODEL)

• Surface windows for new devices (C/R, V, E)

• Save/Load option for fader layers

• Option for BUS BUTTON NAMES (Setup > General)

• Option to LINK MIXER CH + SCREEN (Setup > General)

• Reset button on EQ page

• MAXER curves added to FILTER section

• Gain, Trim, Phantom Power, Mute and Polarity information for each Source box

• On/off switch for the LIMITER in MASTERING effects module

• TRIM added to GEQ

• SOURCE EXTRACTOR/LA LEVELER gate/compressor combo plug-in for all channels

• Send fader assignment extended to MAIN1-4 and MATRIX1-8

• Post-fader Delay on all busses

• Pre-fader Delay on Aux channels

• Bus to bus send from/to all busses

• Channel/Aux sends to all matrices

• New sends configuration overlay

• Talkback to all matrices

• Bus to bus modes for custom fader layers

Changed

• Fader layer select for WING Edit layers (edit pop-up)

• Delay mode (unit) option for all busses

• Monitor/Talkback configuration pages

• Button modes implemented for touch screen talk buttons

• Warning when a bus is sent to the same bus (feedback loop)

• PARTIAL LOAD and PARTIAL UPDATE keep the most recent scope selection        

• Library sorting by type/name

• Preselection of scopes (CHANNEL COPY/INIT toolbox)  

• LIBRARY channel preset scope: sends partially shown as N/A

• MONITORING section delays not working

• MATRIX direct inputs not working

• MIDI CC faders not working for CC > 76

• Increased SLOPE range for ULTRATAP DELAY plug-in

• FX SPILL updated automatically when a different plug-in is loaded

Fixed

• Crash when using selected channel send CC encoders

• Crash when changing default Matrix mode

• VSS3 preset selection box not selectable

New Features

• Bus to bus send from/to all busses

• Channel/Aux sends to all matrices

• Bus to bus modes for custom fader layers

• Pre-fader Delay on aux channels

• Post-fader Delay on all busses

• FX SPILL button on insert effects GUI

• SOURCE EXTRACTOR/LA LEVELER gate/compressor combo plug-in for all channels

• SOURCE EXTRACTOR/LA LEVELER gate/compressor combo plug-in in the Dynamics slot

• Filter controls on EQ page

• MAXER curves added to FILTER section

• Talkback to all matrices

• Gain, Trim, Phantom Power, Mute and Polarity information for each Source box

• On/off switch for the LIMITER in MASTERING effects module

• TRIM added to GEQ

• Send fader assignment extended to MAIN1-4 and MATRIX1-8

• New sends configuration overlay

• Global option to always show active scene (or snapshot)

• GPIO functions for delayed power on (e.g., for power amps)

• CC functions for previous/next channel select

• CC send functions extended to MAIN1-4 and MATRIX1-8

• CC button function to set up the metering and solo TAP point

• CC button function for channel solo

• CC encoder function for lamp, glow and patch brightness

• CC button function to set channel fader to -10dB

• CC fader set option enabled for touch screen faders

• CC value shown on the LCD screen when its name starts with '*'

Changed

• New files shown in file browser when USB record is started

• DCA spill from right section to center section instead of left section

• Layer offset restored when activating FX SPILL

• Channel select overlay metering set to input

• Delay mode (unit) option for all busses

• MONITORS/TALKBACK configuration page

• CC channel MUTE function allows mute override

• MONITORS AUTO, PUSH and LATCH modes implemented for touch screen talk buttons

• CC send function allows to control all possible sends

• Warning when a bus is sent to the same bus (feedback loop)

• PARTIAL LOAD and PARTIAL UPDATE keep the most recent scope selection

Fixed

• Number of entries in playlist not correct when reloading open playlist

• AUTOMIX spill mode displaying wrong channels

• Channel preset load showing FX warning even when FX not in scope

• AES50 I/O highlight function (Sources/Outputs)

• Firmware update file size check

• Channel detail section delay LED control

• Routing lock switch set to unlock when +1 AUTO was active

• COMPRESSOR detector switch sometimes shown when AUTO ENV is active

• Crash when a stereo source was routed to more than 5 destinations under very specific conditions

• Loading of old FX presets (load button was not active)

• Preselection of scopes (Toolbox)

• Short signal drop (LIMITER release) when loading DRAW MORE plug-in

• Channel Configuration screen added (channel config details/parameters/Mute groups/DCA group)

• Gate Screen with interactive graph supported

as promised, here’s the roadmap for the MX MIX development. We’ve added dates for this year’s releases and will update you as we progress with development.

Please keep in mind that the team working on MX MIX is creating completely new code and UI, building an app from the ground up for years and new products to come. This takes time.

The goal is to release a monthly feature update to the Early Access version with a lot more Beta updates in between.

Kind regards,

Goetz and the whole team at Behringer

• Connection problems using the internal WiFi

• Connecting to multiple consoles and/or iPads

• Goodbye random visual glitches around a few icons

Now live on the Apple App Store:
https://apps.apple.com/us/app/x-air/id896725230

• mute/solo switch

• ability to move the fader position on the whole fader lane

• changing panorama now works on the mini slider

• double tap panorama to reset

Many under-the-hood fixes and improvements, including resolving bugs and crashes and overall performance and GUI improvements.

The latest hardware version of X Air mixers is now supported!

• X32 consoles support

• Home Screen with Fader Control, Channel Layer, Main OUT, Channel configuration, Fader Tooltip

• Input channel, Mix Bus, Aux/FX, IN/OUT, Gate Gain, Dyn Gain

• Connection & Splash with Splash, Scanning & Discovery, Manual Connection, Rescanning