Problem with pan on FW 3.0.4

Hello.

There is a problem with the pan function on the wing in version 3.0.4.

- In the Main send:

When you pan a stereo signal, the entire signal does not go to one side or the other but rather a simple decrease of the signal is applied opposite the direction of the pan. If I pan my stereo signal completely to the right, I will only have the right channel of my stereo signal and not an L+R to the right. If we want to keep the left signal, we must then set the width to mono.

- In the solo listening:

In headphone output, the PFL listening remains in stereo no matter what (logical). But in AFL, the pan is not taken into account and the L remains in L and R in R. Just modification of the level according to the fader. But the width is taken into account. And so the L-R can be straight, mono or inverted and that without taking into account the pan.

- For sending to a Bus (in-ear monitor):

There is the same problem as on the main mix.

In case of pan in an ear mix (which is very frequent) the side opposite the pan disappears.

Which is not conceivable for an in-ear mix.