Dedicated RTA Mode (For X32 and WING)

I know there is a way to source a channel so that the EQ reading from your RTA mic reflects on your bus, but I would love to see a dedicated RTA mode that automatically makes channel 32 or 48 for the wing (source 16 for the rack and 24 for the wing rack) your RTA mic channel. Then, a singular screen would pop up allowing you to play pink noise, adjust digital gain to unity, and adjust volume of that pink noise and let you see the EQ curve coming from the RTA mic you have sourced. If it’s possible, the ability to make marks/lines/snapshots of the readings from different positions around a room would be so beneficial. This way you can dial in your front fills, delay speakers, etc. Then, whatever EQ(s) you apply and “bank” or save to clipboard or something of the sort, you could have the ability to apply that to any bus (most likely your LR bus). Then, when you’re ready to bank/save your EQ, copy it to clipboard, exit RTA mode, and the board goes back to the scene that was last uploaded or returns to default (if that’s where it was). Then you have the ability on any bus to “paste from clipboard” the EQ(s) you just made. One last thing is being able to source to multiple places at once of singular places at once. So if you want to get a reading on all of your system, you can select all those outputs for pink noise, or if you want JUST your front fills or JUST your mains, you can source the pink noise to just those to take measurement and mark those curves and save an EQ for those specific buses.